My brakes are squeaking bad and i just changed my brake pads. Anybody know what this could be coming from?

i have a 97 lexus sc400 and i just changed the brake pads but the brakes are still squeaking. Anybody have any ideas on how to stop this? And no they are not cheap brake pads.My brakes are squeaking bad and i just changed my brake pads. Anybody know what this could be coming from?maybe you need your rotors turned (resurfaced)My brakes are squeaking bad and i just changed my brake pads. Anybody know what this could be coming from?Shady installation job. The dealer manual says you have to either grease the back of brake pads OR get a brake pads with built in shims. The problem is vibration between the pad %26amp; rotor is picked up by the caliper assembly and amplifying the noise. All brake makes noise, so you just have to stop this amplification effect. And you can do this with grease in back of brake pads, or thin layer of brake shim.My brakes are squeaking bad and i just changed my brake pads. Anybody know what this could be coming from?probably brake dust, just hose it out that should stops it.My brakes are squeaking bad and i just changed my brake pads. Anybody know what this could be coming from?your boots in the back i just paid 300 bucks for a brake job.haha a bj.lol. and my brakes squeke i was pissed and took them back they replaced them with some ACDELCOS. it stopped the squeking in the front but the backs are squeeking it may be the boots. so just some experience. oh and make them test drive it and have them use varying degrees of braking. hard slow apply that kind of stuff. DONT TAKE IT WHEN THEY JUST PUT ON THE GREASE. YOU CANT STOP. that scared the crap out of me.My brakes are squeaking bad and i just changed my brake pads. Anybody know what this could be coming from?Make sure you didn't bend the wear indicators ,That's that little piece of metal that looks curved over that's attached to your brake pad. When your brakes wear down this indicator will start making a squealing noise to let you know your brake pads need replacing.These indicators are easily bent so this may be your problem.The indicator metal should not come in contact with your rotors until your brakes are well over half worn