Is it worth changing your own brake pads? How difficult is it.?

I have never done it before, but i see that i can save a significant amount of money if i do it myself. There are many resources on the web showing %26quot;how-to%26quot; change brake pads. How likely is it that it will be done wrong, and cause a dangerous situation.

My background: I am a technical person who repairs computers, printers, copiers, and fax machines. I have a Nissan Titan.Is it worth changing your own brake pads? How difficult is it.?Good front pads cost $45 and the total cost to install them is $125 for both parts and labor full warranty. In my opinion, it's not worth investing in all the equipment you need to safely do the job to save the $80.Is it worth changing your own brake pads? How difficult is it.?Is the cost of an hours labour roughly 30 quid worth dying or killing someone over. Think about it your call!Is it worth changing your own brake pads? How difficult is it.?Ok, you're a techie, can I repair my own fax or copier for myself, cause I don't like paying your labour rates either. What do you know about ABS, sensors, rotors, proportioning valves, etc, case closed good luckIs it worth changing your own brake pads? How difficult is it.?You have a good background of taking things apart and putting them back together again so I don't think you'll have any problems. Just follow the instructions and you'll be just fine. I used to work on copiers and brake pads are a lot easier. If your rotors need turning or replacing, make sure you have the right tools especially a torque wrench to seat the bearings correctly. Good luck.Is it worth changing your own brake pads? How difficult is it.?It's not difficult to change brake pads yourself. In addition to the tire iron and car jack in your trunk, you need a wrench (size varies from model to model) and big C-clamp.



My advice: Buy a repair manual for your make/model and follow the instructions. When you're finished you will notice that the brake pedal goes all the way down to the bottom plate. Start the car and pump the brake pedal until you feel firm pressure again. Then go for a short test drive. After the test drive retighten the lugs.



The most common mistake is to switch inner with outer brake pads. You will notice the mistake immediately because the brake pedal stays close to the bottom plate.Is it worth changing your own brake pads? How difficult is it.?you can its actually quite simple....the hardest part is compressing the piston to put the new pads in. they have a tool for it similar to a C-clamp also don't let the caliper hang from the brake line when working on them if you do this the line can break and now you need a to bleed the whole system and a new line. rest the caliper on a box or tie it up with a rope to keep tension off the line.Is it worth changing your own brake pads? How difficult is it.?Piece of CAKE!!! You'll need an hydraulic jack, jack stands, a few hand tools, several screwdrivers (to retract the caliper pistons), a can or two of brake cleaner, and genuine Toyota parts. If you catch it soon enough, you won't even need the rotors turned or replaced. Get a Haynes manual for details. You can do every bit a good job as a brake shop can!! The cool thing about the Toyota pads is that they come ina kit that includes the return springs and new hardware, so there is no second-guessing. YOU CAN DO IT!!!!Is it worth changing your own brake pads? How difficult is it.?If you have a friend that knows how to do the job have him come over and help you and you watch how it's done and the next time you will be able to do it, buy your friend a case of beer when done and if your lucky he will give you a few.