How can I get at the brake pads on a Porsche 944 Turbo?

Regarding the removal of the caliper and anything else. Anyone with experience who can help? Any diagrams on the internet to look at? I searched but found none. Thank you for any help!How can I get at the brake pads on a Porsche 944 Turbo?your problem is your looking under Porsche try looking under AudiHow can I get at the brake pads on a Porsche 944 Turbo?Check out http://dcauto.gotdns.com/ , they have an on-line illustration for Porsche Parts or from Porsche at http://www.porsche.com/usa/accessoriesan .



Basically you need to remove two small hair pins from the pad retaining pins. Then you need to push down on the wire spring and remove the pad retaining pins. After that the pads should come straight out. If these are installed with the factory anti-vibration devices, then you need to us a putty knife to get them loose from the back of the pad. These Anti-Vibe are glued to the back of the pad and plug into the back of each caliper piston. From there you will need to remove the two caliper mounting bolts to get the the rotor off so that it can be %26quot;surfaced%26quot; or %26quot;turned%26quot;.