I need to replace my pads but don't wanna pay a knack to do it.My cuz sez it's easy,but he knows cars.I can change oil an a flat,thats bout it.Can a lil ol girl like me do it myself,or do I hafta suk it up,take it into a shop,an try not to get scammed by sum dumb dude tryin to rip me off cuz I got boobs.I wouldnt mind knowing how to do it anyways,seems like a good thing to know how to do if your a chick.How in the hell do you replace brake pads in 2002 ford focus wagon?;)?Jack up vehicle and remove wheel, put screwdriver between inner pad and brake piston and pry piston in a bit to loosen pads enough to clear edge of rotor. Remove bolts from caliper and remove caliper, remove old pads. Get large channel lock type pliers or a %26quot;c%26quot; clamp and slowly squeeze piston back into caliper untill seated. Install new pads, reinstall caliper and bolts, repeat for other side. Dont forget to pump brakes a few times before driving to push pistons back into place.How in the hell do you replace brake pads in 2002 ford focus wagon?;)?First time, buy a Haynes manual for $15 from Auto Zone, and get the pads while you are there, use a large C-clamp on the caliper to push it in, the book will walk you through the entire process, with pictures. DON'T pry against the piston with a screw driver, that may damage it. The clamp will do the work, and the book is worth the investment.How in the hell do you replace brake pads in 2002 ford focus wagon?;)?Go to your local Ford dealer parts department, ask for part numbers 3S4Z-2001-AA (front brake pads), and 3S4Z-1125-AA (front brake rotors, if equipped with aluminum wheels) or YS4Z-1125-BA (front brake rotors, if equipped with 14%26quot; steel wheels). Remove the four wheel nuts (19mm) on each front wheel with the front of vehicle supported off the ground. Disconnect the steel retainer on each front outer brake pad, remove the two black plastic grommets on the back of each brake caliper. With your 7mm allen head socket, remove the two allen head caliper slides and the caliper will slide off with both of the pads in them. The rest of the instruction is as posted by the above poster. Installation is just the reverse of removal. Hope this helps. Note: Take care NOT to strip the threads on the caliper pins to the steering knuckle when re-installing the brake calipers.How in the hell do you replace brake pads in 2002 ford focus wagon?;)?http://autorepair.about.com/cs/doityours
notice as you scroll down there are more pages
Monday, October 24, 2011
How d I remove my rear brake pads on my 02' Pontiac grand am se?
Please if you know how to work on the REAR brakes on an 02' Pontiac grand am se please give step by step instructions on what we need to do. I have looked on line and can not find any helpful information.How d I remove my rear brake pads on my 02' Pontiac grand am se?pads or shoe if disk type in
how to replace brake pads
how to replace brake shoes wil get how to and its about the same on every car made really easy once you know one you can do any car here is both ways im sure you can find others just type in how to replace brake pads or how to replace brake shoes and if you add video to end of that even find one also like
how to replace brake pad video
how to replace brake shoe video
wil lget all you need to know most all car brakes are the same way some bolts or pins change but how it works stay the same som edo have screw in type pistons will know that if there is a notch cut into them for that type will need to rent a tool onlty a few type of cars have them but either way brakes are easy most anyone can do at homeHow d I remove my rear brake pads on my 02' Pontiac grand am se?Not hard to do, check out a repair manual site, will shoe you replacement, and adjustmentsm and needed parts. Also try to go get a free estimate from a brake shop, many of these are free, and will give you a general idea, what needs to be replaced. Good luckHow d I remove my rear brake pads on my 02' Pontiac grand am se?you best bet is to get a repair manual, haynes should have the pictures to help you out.kids hair copier request for information
how to replace brake pads
how to replace brake shoes wil get how to and its about the same on every car made really easy once you know one you can do any car here is both ways im sure you can find others just type in how to replace brake pads or how to replace brake shoes and if you add video to end of that even find one also like
how to replace brake pad video
how to replace brake shoe video
wil lget all you need to know most all car brakes are the same way some bolts or pins change but how it works stay the same som edo have screw in type pistons will know that if there is a notch cut into them for that type will need to rent a tool onlty a few type of cars have them but either way brakes are easy most anyone can do at homeHow d I remove my rear brake pads on my 02' Pontiac grand am se?Not hard to do, check out a repair manual site, will shoe you replacement, and adjustmentsm and needed parts. Also try to go get a free estimate from a brake shop, many of these are free, and will give you a general idea, what needs to be replaced. Good luckHow d I remove my rear brake pads on my 02' Pontiac grand am se?you best bet is to get a repair manual, haynes should have the pictures to help you out.
How do you change rear brake pads on a 1991 eclipse gs?
Because im too poor to afford a haynes manual.How do you change rear brake pads on a 1991 eclipse gs?first jack it up.make very sure it is secure.take off the wheels.study it if you are mechincal you will figure it out.good luck.if you have a friend that has done it before.that will be very helpful.How do you change rear brake pads on a 1991 eclipse gs?1991 eclipse has brake shoes on the rear only front are disk ...it involves taking the drum off and the springs the operate the shoes...if you don't know what you're doing then don't try it...brakes are the most important safety item on your car...disk pads on the other had are very easy to replace but again there is more to it that just replacing pads...like inspecting the seals , the operation of the caliper, the lubrication of the guide pins..etc...
I have a 2001 Impala how hard is it to change the brake pads and rotors out?
I am a mechanically inclined person with not much auto experience. It just costs so much to have a shop put on new rotors and most of the time they hose you on the parts.I have a 2001 Impala how hard is it to change the brake pads and rotors out?Disc brake pads are easy. Once the caliper has been removed, the rotor should slip right off the studs, although there is probably a retaining clip you'll need to remove if they're never been off before. It would be worth your while to go to Autozone and pickup the Haynes manual for a 2001 Impala ($15-$16).I have a 2001 Impala how hard is it to change the brake pads and rotors out?changing the rotors and brake pads is pretty easy, you may have to remove some long bolts going through the caliper, or use a hammer and punch to drive out a bracket holding the caliper together. most have bolts holding the caliper together. but one thing to remember is when you push the piston back into the caliper, be sure to crack open the bleeder screw so that you do not force brake fluid back up through the abs(if it has abs) or up back in to the master cylinder which could flip the seal on it causing it to leak. also a good habit would be to use a c-clamp to push back the piston, but use one of the old brake pads against the piston so that it doesn't damage it. as for the rotors, they should just slip off, unless there is a retaining clip that u would have to remove, but it easily comes off in most cases.oh and be extremely sure to tighten the bleeder screw back up or else you will get air in your lines causing u to have a spongy brake pedal and causing you to have to bleed your brakes.just don't over tighten them. if the bleeder screw begins to strip, do not continue to unscrew it as it may snap. if it snaps or strips you may need a new caliper unfortunately. hope this helpsI have a 2001 Impala how hard is it to change the brake pads and rotors out?there are two bolts that hold the caliper on two the mounting bracket. I think they are 14mm. you'll probably have to retract the piston in the caliper to get the pads to clear the rust ridge on the rotor. Use a big C-clamp around the caliper and push on the back of the outboard pad. After you take off the caliper, you can use the c-clamp and the inboard pad to retract the piston all the way. There are two bolts that hold the caliper mounting bracket on to the knuckle. I forget the sizes of the bolts. Actually, I think that the caliper bolts may be 12mm and the mounting bracket bolts may be 14mm. You'll have to remove the bracket if you are replacing the rotors. But, unless you have a brake pulsation, excessive scoring or pitting, you shouldn't have to replace the rotors or have them resurfaced. In fact, gm doesn't recommend resurfacing the rotors for just replacing the pads. Only for the reasons I just mentioned. Overall, it's a pretty simple job. Quite self explanatory.
My rotors & brake pads need to be replaced. How long can I drive on them until it is completely unsafe?
I know that the obvious answer is going to be %26quot;as soon as possible%26quot; or %26quot;its already dangerous%26quot; or %26quot;it depends on how much damage has been done%26quot;. I'm really broke right now, so I'm looking for an actual answer. An hour? A day? A week? A month?My rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?If they still stop the car, and if you compensate for the reduced stopping ability, and keep in mind and be ready for a total brake failure ... it will not be completely unsafe until and unless you have total failure. No telling how long it will be until they fail completely. Of course, you could end up having to replace the calipers as well as the pads and rotors...
If you can adaquately compensate, very little is unsafe.My rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?about a couple of weeks, you might loose some braking. It's more the noise factor that will make you replace them. everytime you stop, it will be incredibly annoyingMy rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?No one, with any sense, would give you an answer to that. However when you wind up in the middle of someone's rear bumper you'll know for sure that you waited too long.My rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?Im on the same shoes
Im changing them next week per my mechanic
Aaarrrrhhh!!!My rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?I guess the answer is.....who told you that your brakes needed replacing?
How bad did they tell you they were?.
If an inspection station wouldn't pass the car because of it....then.....the next time you drive the car....head right for the repair shop and get new ones.
If you are %26quot;really broke%26quot;...as you say...then....either borrow the money for the brakes....or get a ride from someone.
Putting off the inevitable is only going to get you or someone else killed....yeah....KILLED!!........ don't take the risk!!....get the brakes changed.My rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?probably a year if ur happy to put up with the squeeling sound, it will just end up being metal on metal but the rear pads will have more on them so u will just have to depress the brake pedal harder to compensate for the loss of pad material on the front because the front always wear out before the back. dont stress nothing will happen just get it done when u have the cash
If you can adaquately compensate, very little is unsafe.My rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?about a couple of weeks, you might loose some braking. It's more the noise factor that will make you replace them. everytime you stop, it will be incredibly annoyingMy rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?No one, with any sense, would give you an answer to that. However when you wind up in the middle of someone's rear bumper you'll know for sure that you waited too long.My rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?Im on the same shoes
Im changing them next week per my mechanic
Aaarrrrhhh!!!My rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?I guess the answer is.....who told you that your brakes needed replacing?
How bad did they tell you they were?.
If an inspection station wouldn't pass the car because of it....then.....the next time you drive the car....head right for the repair shop and get new ones.
If you are %26quot;really broke%26quot;...as you say...then....either borrow the money for the brakes....or get a ride from someone.
Putting off the inevitable is only going to get you or someone else killed....yeah....KILLED!!........ don't take the risk!!....get the brakes changed.My rotors %26amp; brake pads need to be replaced. How long can I drive on them until it is completely unsafe?probably a year if ur happy to put up with the squeeling sound, it will just end up being metal on metal but the rear pads will have more on them so u will just have to depress the brake pedal harder to compensate for the loss of pad material on the front because the front always wear out before the back. dont stress nothing will happen just get it done when u have the cash
Friday, September 23, 2011
How do I soften roller blade brake pads???
I just got new skates. I love the skates and they work excellently. Except the brakes are horrible! The manual even said the brakes are not made for stopping fast. What good are they then?! The skates are bladerunner pro xt. Does anyone know how to soften/improve stopping quality?How do I soften roller blade brake pads???You can't soften them. I have no idea why they put those on unless they felt that people who buy cheap skates (Rollerblade only recently put their name on the Bladerunner line) don't want to replace brakes very often or will be going fast enough to need better ones.
The good news is that they are using the same shape brake block as the regular Rollerblade skates (without ABT) use.
You can feel the difference in the rubber that is used on the Rollerblade ones.How do I soften roller blade brake pads???unscrew the bad brakes and buy new brakes
The good news is that they are using the same shape brake block as the regular Rollerblade skates (without ABT) use.
You can feel the difference in the rubber that is used on the Rollerblade ones.How do I soften roller blade brake pads???unscrew the bad brakes and buy new brakes
How much should it cost to get front rotors and brake pads for my 2000 Saturn SL2?
Typically I use a chain repair shop and not the dealership. ThanksHow much should it cost to get front rotors and brake pads for my 2000 Saturn SL2?Front rotors and brake pads at a chain store(midas, Meineke, etc) is probably going to run you $250-300. Parts doing it yourself is giong to run $150 or so.How much should it cost to get front rotors and brake pads for my 2000 Saturn SL2?never heard of chain repair shop/due to descrenpancys in prices in diff parts of the country its hard to say/on east coast wholesale price at auto parts shop is 55 to 65 ea on discs and 85 on pads plus installation/but its hard to tell about where you live. they had a 05 dodge caravan w/130k and they were talking about 7500 for a car that in nj would be about 3500. big diff good luckmyspace quiz in love with married man
Subscribe to:
Posts
(Atom)